2020. 2. 9. 15:23ㆍ카테고리 없음
Hi all, Just picked up a DWL-G710 wireless range extender to get better coverage at the other end of my house. I've got it all setup and it appears to be working well. However, the DWL-G710 just repeats the signal using the exact same SSID as the base AP. That wouldn't be a problem, except that the D-Link AirPlus G Wireless Utility doesn't allow you to select an AP by its MAC address/BSSID - it only lets you enter the SSID. (It does.DISPLAY.
Search All D-Link AirPlus G DWL-G122 Wireless USB Adapter Drivers Uploader Notes I got this driver in a bundle from the manufacturer's website, bundled with some other (useless) installer. D-link AirPlus G DWL-G630 (68) Wireless Adapter. The D-Link AirPlus G DWL-G Cardbus Adapter is a wireless laptop adapter featuring the very latest in advanced wireless silicon chip technology including enhanced security to shield and protect your wireless communication from intruders.
both my base AP.and. my range extender in the site survey, but when I choose either one, it always connects to the base AP despite the fact that it has a much weaker signal). The manual for the DWL-G710 says that the AirPlus G Utility should allow you to choose between the two SSIDs based on their MAC address, but this doesn't appear to be possible with my utility version. I'm using the D-Link Airplus G Wireless Utility v1.10 with a D-Link DWL-G122 wireless USB adaptor (driver v3.00.21). I get the feeling I must be missing something here, as this would be a pretty big oversight on D-Link's part.
Any suggestions?
I have just setup my PC with the new Vista beta 2 o/s on build 5384 and I cant get my d-link wireless adapter to work. The adapter is D-Link Airplus G DWL-G122 Wireless USB Adapter (rev.B) I have downloaded the latest driver from their website but that made no difference and also spoken with d-link tech support and they say cos its beta they cant support it and just say it will be supported when the final release is published. Anyone had the same problem and managed to get round it? If so what did you do?
Also has anyone got a wireless usb adapter working on the the build? If so what make&model of adapter do you have as I may then have to look to upgrade/change product? Solution: press F8 in boot and select disable driver signatur 'James' wrote: I have just setup my PC with the new Vista beta 2 o/s on build 5384 and I cant get my d-link wireless adapter to work. The adapter is D-Link Airplus G DWL-G122 Wireless USB Adapter (rev.B) I have downloaded the latest driver from their website but that made no difference and also spoken with d-link tech support and they say cos its beta they cant support it and just say it will be supported when the final release is published.
anyone had the same problem and managed to get round it? If so what did you do?
also has anyone got a wireless usb adapter working on the the build? If so what make&model of adapter do you have as I may then have to look to upgrade/change product? 'James' wrote: I have just setup my PC with the new Vista beta 2 o/s on build 5384 and I cant get my d-link wireless adapter to work. The adapter is D-Link Airplus G DWL-G122 Wireless USB Adapter (rev.B) I have downloaded the latest driver from their website but that made no difference and also spoken with d-link tech support and they say cos its beta they cant support it and just say it will be supported when the final release is published. anyone had the same problem and managed to get round it?
If so what did you do? also has anyone got a wireless usb adapter working on the the build? If so what make&model of adapter do you have as I may then have to look to upgrade/change product? Older DWL-G120 Driver Works in Vista Beta 2; Newer Driver Did Not Not sure what happened to my previous post, but here it is again. I was able to get my DWL-G120 rev. B1 WiFi USB adapter to work on Vista x86 Beta 2.
I used a combination of a driver (1.0.10.1) modified by Okurisama. The original driver is available on the D-Link website and is by GlobespanVirata (now Conexant), and the modified driver is available at either of these two sites: or Originally, I went ahead and updated the G120 driver (3.0.22.0) from Windows Update, but found that after 10 min or so, it would lose connection to the Internet and only have limited access to my D-Link DI-624 WiFi router (not sure yet if the problem is the driver or Trend Micro's PCCillin - could not uninstall PCCillin, so unsure at this point). I could not reconnect unless I rebooted my PC.
Ieee 802 11 B G Wireless Usb Adapter Driver
I could rollback the driver, but the problem persisted. So in order to get the benefit of the new driver I copied the newer PRISMA02.sys file over to my G120 driver directory and replaced the older version. I then installed a fresh copy of Vista and applied the modified driver, and it works perfectly so far; although it still reports the driver as being 1.0.10.1 despite that it's using the 3.0.22.0 PRISMA02.sys file. I just don't select the download from Windows Update anymore. In checking out the DWL-G122 drivers, they appear to have different files than the G120 (no PRISMA02.sys file for example); so I cannot say if you can use the G120 drivers instead. 'James' wrote: I have just setup my PC with the new Vista beta 2 o/s on build 5384 and I cant get my d-link wireless adapter to work. The adapter is D-Link Airplus G DWL-G122 Wireless USB Adapter (rev.B) I have downloaded the latest driver from their website but that made no difference and also spoken with d-link tech support and they say cos its beta they cant support it and just say it will be supported when the final release is published.
anyone had the same problem and managed to get round it? If so what did you do? also has anyone got a wireless usb adapter working on the the build?
Best Wireless Usb Adapter
If so what make&model of adapter do you have as I may then have to look to upgrade/change product? I am using a HAWKING Mini Wireless-G USB 2.0 Network Adapter HWU54G and it installs and runs very good on the Vista 2 build 5384 using the Win XP driver that was delivered with the adapter. Eventually check their homepage 'RMWChaos' wrote in message news: 'James' wrote: I have just setup my PC with the new Vista beta 2 o/s on build 5384 and I cant get my d-link wireless adapter to work. The adapter is D-Link Airplus G DWL-G122 Wireless USB Adapter (rev.B) I have downloaded the latest driver from their website but that made no difference and also spoken with d-link tech support and they say cos its beta they cant support it and just say it will be supported when the final release is published.
Compact G Wireless Usb Adapter
anyone had the same problem and managed to get round it? If so what did you do? also has anyone got a wireless usb adapter working on the the build? If so what make&model of adapter do you have as I may then have to look to upgrade/change product?